Product Aluminium Wood Primer
Type Oil based wood primer containing aluminium pigment.
Applied directly to bare wood. Seals’ surface and provides adhesion for subsequent coats of
paint. Suitable for exterior use.
The leaf grade aluminium pigment contained in the primer provides an effective barrier
Wooden surfaces to be primed must be dry, clean, smooth and free from dust, oil, grease,
wax and other contaminants likely to affect adhesion. All knots should be sealed with
Rustin’s Knotting before priming.
Stir thoroughly before and during use. The first coat may be thinned with 10% white spirit if
necessary. After priming, holes and cracks may be filled with Rustin’s Wood Filler.
Coats 1 or 2 coats depending on requirements.
The primer is touch dry within 2-3 hours depending on temperature and humidity. Allow 12-
16 hours to fully dry.
Re-coating Time 12-16 hours should be allowed before applying undercoat.
Application Temp. Ideally 15-25°C. Do not use below 10°C, or in conditions of high humidity.
Coverage 15 square metres/litre per coat depending on the absorbency of the surface.
Maintenance Must be covered with an undercoat.
Compatibility Compatible with all types of paint.
Settlement Stir well before use.
The shelf life of the product in an airtight container is a very long period of time. It is preferable to
store the product in a cool dry place. It is important to replace the lid and ensure an airtight seal.
Flammable. Keep out of reach of children. Keep away from sources of ignition. No smoking.
Avoid contact with skin and eyes. Use only in well ventilated areas.
A full Safety Data Sheet is available upon request or on www.rustins.co.uk.
Use White Spirit or Rustin’s Brush Cleaner whilst still wet. If dried on, clean equipment and
brushes with Rustin’s Brush Restorer.
Sizes 250ml 500ml 1 Lt