Sikkens Cetol HLS Plus is perfect for use on softwoods, hardwoods, plywood, block board and particle board, claddings, fascias, architraves, timber frames, fences and sheds.
Can be used on its own or when applied to joinery such as windows and doors, it is recommended to over-coat with Sikkens Cetol Filter 7 Plus.
Sikkens Cetol HLS Plus Translucent Woodstain is a low build, solvent-borne semi-gloss woodstain that can be used both as a base stain and as a finishing coat.
It is highly translucent to bring out the beauty of woodgrain, it protects against mould and algae and is resistant to UV radiation, peeling and cracking.
Cetol HLS Plus is also microporous and water-repellent
It can be used as a finishing coat on exterior softwood and hardwood substrates such as cladding, fascias, soffits, rough sawn timber and fencing.
As a base stain, Cetol HLS plus is readily absorbed into timber to provide a sound base for finishing coats. It can be used alone as a system on cladding, decking and garden furniture or as a base stain before the application of Cetol Filter 7 plus on windows and doors.
However it should not be used alone as a finish for hardwood timbers.
No. of coats: 1-3
Coverage: Up to 12 m² per litre
Drying time: 24 hrs